NVIDIA GeForce RTX 4070 Ti vs NVIDIA GeForce RTX 3080
Transient-aware PSU requirements, ATX compliance, cable safety audit, and power efficiency comparison.
| Specification | NVIDIA GeForce RTX 4070 Ti | NVIDIA GeForce RTX 3080 |
|---|---|---|
| Performance Tier | High-End | Ultra |
| Total Board Power (TBP) | 285W | 320W |
| Transient Peak (modeled) | 411W | 561W |
| Minimum Recommended PSU | 600W | 800W |
| PCIe Connector Required | 12v-2x6 | 8pin-x2 |
| Number of Connectors | 1 | 2 |
| ATX 3.1 Required | ✓ Yes | ✗ No |
| Daisy-Chain Safe | ✗ No | ✗ No |
| MSRP | $799 | $699 |
| Generation | Ada Lovelace | Ampere |
PSU Requirement Breakdown
NVIDIA GeForce RTX 4070 Ti
⚠ NVIDIA GeForce RTX 4070 Ti requires an ATX 3.1 PSU with a native 12V-2x6 cable. DO NOT use adapter cables from older 8-pin connectors. If your PSU lacks a native 12V-2x6 port, you must upgrade your PSU.
NVIDIA GeForce RTX 3080
⚠ NVIDIA GeForce RTX 3080 requires 2 separate 8-pin PCIe power cables. DO NOT daisy-chain — each cable must run directly from the PSU to the GPU.
Power Efficiency Verdict
NVIDIA GeForce RTX 4070 Ti requires less PSU headroom per dollar spent. It needs 600W recommended at $799, versus 800W at $699 for the NVIDIA GeForce RTX 3080.
Note: NVIDIA GeForce RTX 4070 Ti requires an ATX 3.1 PSU with a native 12V-2x6 cable — factor in a possible PSU upgrade cost if you currently own an ATX 2.x unit.
Frequently Asked Questions
Which PSU do I need for NVIDIA GeForce RTX 4070 Ti?
NVIDIA GeForce RTX 4070 Ti has a 285W TBP but can spike to 411W during transient loads. We recommend a minimum 600W ATX 3.1 PSU with a native 12V-2x6 connector for safe operation with headroom.
Which PSU do I need for NVIDIA GeForce RTX 3080?
NVIDIA GeForce RTX 3080 has a 320W TBP and transient peak up to 561W. We recommend a minimum 800W ATX 3.1 PSU for stable operation.
Does NVIDIA GeForce RTX 4070 Ti or NVIDIA GeForce RTX 3080 need ATX 3.1?
NVIDIA GeForce RTX 4070 Ti requires an ATX 3.1 PSU with a native 12V-2x6 connector. Do not use adapter cables. NVIDIA GeForce RTX 3080 uses 8pin-x2 and does not require ATX 3.1.