HomeGPU ComparisonsAMD Radeon RX 7700 XT vs NVIDIA GeForce RTX 5070 SUPER
Power Supply Comparison

AMD Radeon RX 7700 XT vs NVIDIA GeForce RTX 5070 SUPER

Transient-aware PSU requirements, ATX compliance, cable safety audit, and power efficiency comparison.

SpecificationAMD Radeon RX 7700 XTNVIDIA GeForce RTX 5070 SUPER
Performance TierMid-RangeHigh-End
Total Board Power (TBP)245W275W
Transient Peak (modeled)371W391W
Minimum Recommended PSU550W550W
PCIe Connector Required8pin-x212v-2x6
Number of Connectors21
ATX 3.1 Required✗ No✓ Yes
Daisy-Chain Safe✓ Yes✗ No
MSRP$369$649
GenerationRDNA 3Blackwell

PSU Requirement Breakdown

AMD

AMD Radeon RX 7700 XT

Sustained Draw301W
Transient Peak371W
Min PSU Required550W
Cable Safety✓ Safe
NVIDIA

NVIDIA GeForce RTX 5070 SUPER

Sustained Draw301W
Transient Peak391W
Min PSU Required550W
Cable Safety⚠ Warning

⚠ NVIDIA GeForce RTX 5070 SUPER requires an ATX 3.1 PSU with a native 12V-2x6 cable. DO NOT use adapter cables from older 8-pin connectors. If your PSU lacks a native 12V-2x6 port, you must upgrade your PSU.

Power Efficiency Verdict

NVIDIA GeForce RTX 5070 SUPER requires less PSU headroom per dollar spent. It needs 550W recommended at $649, versus 550W at $369 for the AMD Radeon RX 7700 XT.

Note: NVIDIA GeForce RTX 5070 SUPER requires an ATX 3.1 PSU with a native 12V-2x6 cable — factor in a possible PSU upgrade cost if you currently own an ATX 2.x unit.

Frequently Asked Questions

Which PSU do I need for AMD Radeon RX 7700 XT?

AMD Radeon RX 7700 XT has a 245W TBP but can spike to 371W during transient loads. We recommend a minimum 550W ATX 3.1 PSU for safe operation with headroom.

Which PSU do I need for NVIDIA GeForce RTX 5070 SUPER?

NVIDIA GeForce RTX 5070 SUPER has a 275W TBP and transient peak up to 391W. We recommend a minimum 550W ATX 3.1 PSU with a native 12V-2x6 connector for stable operation.

Does AMD Radeon RX 7700 XT or NVIDIA GeForce RTX 5070 SUPER need ATX 3.1?

AMD Radeon RX 7700 XT uses a standard 8pin-x2 connector and does not strictly require ATX 3.1, though an ATX 3.x PSU is still recommended for transient headroom. NVIDIA GeForce RTX 5070 SUPER also requires ATX 3.1 with a 12V-2x6 connector.

Run custom PSU analysis for your full build →
Was this page helpful?
Share:X / TwitterRedditFacebook