AMD Radeon RX 7900 XTX vs NVIDIA GeForce RTX 5070 Ti SUPER
Transient-aware PSU requirements, ATX compliance, cable safety audit, and power efficiency comparison.
| Specification | AMD Radeon RX 7900 XTX | NVIDIA GeForce RTX 5070 Ti SUPER |
|---|---|---|
| Performance Tier | Ultra | High-End |
| Total Board Power (TBP) | 355W | 350W |
| Transient Peak (modeled) | 571W | 471W |
| Minimum Recommended PSU | 800W | 650W |
| PCIe Connector Required | 8pin-x2 | 12v-2x6 |
| Number of Connectors | 2 | 1 |
| ATX 3.1 Required | ✗ No | ✓ Yes |
| Daisy-Chain Safe | ✗ No | ✗ No |
| MSRP | $799 | $849 |
| Generation | RDNA 3 | Blackwell |
PSU Requirement Breakdown
AMD Radeon RX 7900 XTX
⚠ AMD Radeon RX 7900 XTX requires 2 separate 8-pin PCIe power cables. DO NOT daisy-chain — each cable must run directly from the PSU to the GPU.
NVIDIA GeForce RTX 5070 Ti SUPER
⚠ NVIDIA GeForce RTX 5070 Ti SUPER requires an ATX 3.1 PSU with a native 12V-2x6 cable. DO NOT use adapter cables from older 8-pin connectors. If your PSU lacks a native 12V-2x6 port, you must upgrade your PSU.
Power Efficiency Verdict
NVIDIA GeForce RTX 5070 Ti SUPER requires less PSU headroom per dollar spent. It needs 650W recommended at $849, versus 800W at $799 for the AMD Radeon RX 7900 XTX.
Note: NVIDIA GeForce RTX 5070 Ti SUPER requires an ATX 3.1 PSU with a native 12V-2x6 cable — factor in a possible PSU upgrade cost if you currently own an ATX 2.x unit.
Frequently Asked Questions
Which PSU do I need for AMD Radeon RX 7900 XTX?
AMD Radeon RX 7900 XTX has a 355W TBP but can spike to 571W during transient loads. We recommend a minimum 800W ATX 3.1 PSU for safe operation with headroom.
Which PSU do I need for NVIDIA GeForce RTX 5070 Ti SUPER?
NVIDIA GeForce RTX 5070 Ti SUPER has a 350W TBP and transient peak up to 471W. We recommend a minimum 650W ATX 3.1 PSU with a native 12V-2x6 connector for stable operation.
Does AMD Radeon RX 7900 XTX or NVIDIA GeForce RTX 5070 Ti SUPER need ATX 3.1?
AMD Radeon RX 7900 XTX uses a standard 8pin-x2 connector and does not strictly require ATX 3.1, though an ATX 3.x PSU is still recommended for transient headroom. NVIDIA GeForce RTX 5070 Ti SUPER also requires ATX 3.1 with a 12V-2x6 connector.